Rulota.ro

[teo]

SISTEM INCALZIRE RULOTA SOBA TRUMA - SCHITA SI COMPONENTE

CLICK PE POZA PT MARIRE

01 30030-89400 Heat exchanger complete with exhaust duct fitting
02 30030-42700 Mica window small – 42mm x 15mm
03 30030-03600 Exhaust duct fitting complete
04 10030-26500 O-ring 53 x 5
05 10010-84500 Screw M 5 x 16
06 30030-33300 Floor base complete with screws
07 30030-85300 Screw M 5 x 55
08 30030-85400 Spacer tube 8 x 1
09 10020-18200 Nut M5 Self-locking
10 10010-66200 Screw B 5.5 x 25
11 30030-85700 Earth spring – only S3002P
12 30030-29800 Holder for heat detector
13 30030-29300 Edge protection
14 30050-53000 Auto ignitor with adapter cable without battery
14x 30050-53500 Adapter cable auto ignitor for the use of new auto ignitors in old appliances
until 05/99 – not illustrated
15 30020-13300 Battery box for auto ignitor until 05/99
16 30030-99200 Battery Mignon 1.5v
17 30030-16100 Heater deflector
18 30030-01300 Control rod until 05/96
19 30040-13600 Control rod after 05/96
20 30040-40400 Control knob after 05/96
21 30050-58000 Safety pilot valve complete with adapter plug
22 30050-58100 Micro switch complete with adapter plug
22x 30050-59200 Adapter plug for connection to auto ignitors with 2 batteries (not illustrated)
23 30010-23400 Socket board 2-pin – black
24 30030-12200 Magnet inset mini
25 30030-12000 MS-nut for magnet inset
26 30030-03100 Feed pipe with double conical ring L8 and male fitting until 05/99
27 30010-10900 Double cinical ring L8
28 30010-11000 Male fitting
29 30040-64600 Burner complete S32P, 30mbar, for piezo (with new front case) with spark
electrode 75cm, thermocouple and burner tubes
29 30040-64700 Burner complete S32P, 50mbar, for piezo (with new front case) with spark
electrode 75cm, thermocouple and burner tubes
29 30030-04000 Burner complete S32P, 30mbar, for piezo (with old front case) with spark
electrode 95cm, thermocouple and burner tubes
29 30030-03900 Burner complete S32P, 50mbar, for piezo (with old front case) with spark
electrode 95cm, thermocouple and burner tubes
29 30030-02000 Burner complete S32, 30mb with spark electrode 45cm long, thermocouple
and burner tubes
29 30030-01900 Burner complete S32, 50mb with spark electrode 45cm long, thermocouple
and burner tubes
30 30040-18600 Burner 30mbar screwed ignitor plug to order in addition
30 30040-18700 Burner 50mbar screwed ignitor plug to order in addition
31a 30040-64500 Spark electrode 75cm piezo, for appliances with front case in new design
31a 30030-03000 Spark electrode 95cm piezo, for appliances with front case in new design
31a 30030-02900 Spark electrode 45cm
31b 30040-65900 Spark electrode 75cm with screw, piezo, for appliances with font case new
design
31b 30040-65800 Spark electrode 45cm with screw
31b 30030-27300 Spark electrode 95cm with screw, piezo, for appliances with front case in
old design
32 30010-23500 Flat connector 2.8mm
33 30030-84000 Mini cable holder
34 30050-13900 Thermocouple 25cm with attachment nut
35 30030-02300 Pilot tube 50mb, with double conical ring L 5 and male fitting
35 30030-02400 Pilot tube 30mb, with double conical ring L 5 and male fitting
36 30030-02200 Burner tube 30mbar. Details like part no 30030-02400
36 30030-02100 Burner tube 50mbar. Details like part no 30030-02300`
37 30030-04300 Extension complete with perforated plate and extension spring
38 30030-17500 Perforated plate
39 30030-28500 Extension spring
40 30030-19400 Distance sheet until 05/99
40 30040-22000 Distance sheet after 05/99
41 30030-16400 Frame complete
42 30030-00300 Piezo ignitor for appliances with front case in old design
43 30040-62900 Piezo ignitor for appliances with front case in new design
44 30040-64000 Earth cable
45 30030-04800 Air intake extension with 50cm tube
x 30030-85500 Gas tube interior connection right (not illustrated)
x 30030-85600 Gas tube interior connection left (not illustrated)
x 30040-40200 Accessory kit complete for S3002 with new front case (not illustrated)
x 30040-61600 Accessory kit complete for S3002 P with new front case (not illustrated)

CLICK PE POZA PT MARIRE